IFB Washing Machine TUB HOSE

The IFB Washing Machine Tub Hose (Part Number: UF221RUTUH010) is an authentic original equipment manufacturer (OEM) replacement internal water hose designed for select IFB front load washing machines. Engineered to bridge connections between the wash tub, dispenser assembly, or drain pump circuit, this molded rubber hose routes water and detergent solutions reliably while absorbing intense drum oscillations. Its heavy-duty elastomer construction prevents kinking, collapsing under suction, or splitting from thermal stress.

Key Features

• Heavy-Duty Molded EPDM Rubber: High-grade elastomer resists hot wash temperatures, laundry detergents, descaling solutions, and fabric softeners without softening, hardening, or cracking.

• Flexible Ribbed / Bellow Section: Built-in flexible folds absorb vigorous tub movements during high-RPM spin extraction without straining connected plastic ports.

• Reinforced Sealing Necks: Precision-molded inlet and outlet collars provide an airtight, watertight seal under standard spring or screw hose clamps.

• Anti-Collapse Geometry: Thick sidewall construction prevents the hose from flattening or collapsing during rapid water flow or suction.

Benefits

• Solves internal water leaks, puddles forming beneath the washing machine, and water damage to lower electrical components.

• Replaces split, punctured, hardened, or dry-rotted internal rubber hoses.

• Direct OEM replacement ensures 100% factory dimensional fit and clamp seating without needing trimming or modifications.

Applications

Designed specifically for select IFB front load washing machine models (including Elena, Senator, Executive, Diva, and Serenade series) requiring internal tub hose part number UF221RUTUH010.

What's Included

• 1 x Genuine IFB Washing Machine Tub Hose (UF221RUTUH010)

Usage Instructions

1. Unplug the washing machine from the mains electrical socket and shut off the water supply before starting the repair.

2. Remove the top panel or rear/bottom service panel (depending on the hose's location in your specific IFB model) to access the tub connection.

3. Place a towel or shallow tray underneath the hose area to catch any residual water.

4. Using pliers or a flathead screwdriver, loosen and slide back the retaining hose clamps at both ends of the damaged hose.

5. Carefully pull the old hose off the plastic/tub connection barbs.

6. Clean any limescale, lint, or detergent buildup from the connection fittings.

7. Slide the hose clamps onto the new IFB UF221RUTUH010 hose, push the hose fully onto both connection ports, and secure the clamps in their designated grooves.

8. Reassemble the cabinet panels, reconnect water and power, and run a short rinse/drain test cycle to verify leak-free operation.

Safety Instructions

• Always disconnect electrical power and turn off the water supply prior to removing machine panels.

• Wear protective work gloves to protect hands against sharp internal sheet metal edges.

Care Instructions

• Periodically run a maintenance descaling cycle to prevent limescale and lint buildup inside internal hoses.

Technical Specifications

Attribute	Specification
Brand	IFB
Model / Part Number	UF221RUTUH010
Component Type	Washing Machine Internal Tub Hose
Appliance Type	Front Load Washing Machines
Material	Heavy-Duty Molded EPDM Rubber
Color / Finish	Black
Country of Origin	India
Package Contents	1x Tub Hose