IFB Washing Machine RUBBER SLEEVE 6 KG RCDOOR LAMP

The IFB Washing Machine Door Rubber Sleeve / Bellow Gasket (Part Number: UF221RURSL370) is an authentic original equipment manufacturer (OEM) replacement component designed specifically for IFB 6 kg front load washing machines equipped with RC door profiles and drum illumination lamp ports. Connecting the front outer tub assembly to the front cabinet door frame, this heavy-duty molded rubber seal creates a complete watertight barrier during wash and high-speed spin cycles. Its flexible bellow profile absorbs intense tub oscillations while preventing water, suds, and garments from slipping between the rotating inner drum and outer tub shell.

Key Features

• Molded Port for Drum Lamp Assembly: Features a dedicated integrated provision/port to accommodate the internal drum lamp lighting module without compromising the seal.

• Heavy-Duty Molded EPDM Rubber: Formulated to withstand extreme wash temperatures, strong detergents, descaling chemicals, and constant mechanical flexing without tearing or hardening.

• Integrated Drainage Channels: Precision-engineered lower drain holes and folds allow residual water to evacuate quickly, minimizing stagnant water retention.

• Precision Factory Fit: Built to exact OEM dimensional tolerances for 6 kg RC models, ensuring leak-free seating under inner and outer retaining clamp springs.

Benefits

• Eliminates front door water leakage, water pooling beneath the appliance, and moisture seepage around the lamp port.

• Solves problems related to torn, punctured, mold-stained, hardened, or foul-smelling door bellows.

• Direct OEM replacement ensures 100% factory clamping alignment and a reliable watertight seal without modifications.

Applications

Designed specifically for select IFB 6 kg front load washing machines with RC door designs and internal drum lighting setups requiring rubber sleeve part number UF221RURSL370.

What's Included

• 1 x Genuine IFB Front Load Washing Machine Rubber Door Sleeve / Bellow (UF221RURSL370)

Usage Instructions

1. Unplug the washing machine from the mains electrical socket and shut off the water supply before beginning repair.

2. Remove the outer door boot clamp spring using a flat-head screwdriver or spring expander tool, then peel the front lip of the old gasket away from the front panel.

3. Disconnect the drum lamp housing/wiring carefully from its dedicated socket on the existing sleeve.

4. Remove the top lid, control fascia, and front cabinet panel (if required by your IFB chassis model).

5. Loosen the inner tub retaining clamp spring and remove the damaged rubber sleeve from the outer tub rim.

6. Clean away any soap scum, limescale, or debris from the outer tub seating channel.

7. Align the new IFB UF221RURSL370 rubber sleeve (ensuring drain holes and lamp port are properly oriented) and seat the inner bead securely over the tub rim.

8. Reinstall the inner clamp spring, re-seat the drum lamp module, reassemble the front cabinet, stretch the outer lip over the front panel rim, and secure it with the outer clamp spring.

9. Run a short rinse/spin test cycle to verify watertight operation.

Safety Instructions

• Always disconnect electrical power and turn off water supply lines prior to removing panels or working around electrical lamp modules.

• Wear protective work gloves to avoid injury from sharp internal sheet metal and tub edges.

Care Instructions

• Wipe down the inner folds of the rubber bellow and around the lamp port with a dry microfiber cloth after every wash cycle.

• Leave the washer door slightly open when not in use to allow moisture to evaporate and prevent mildew formation.

Technical Specifications

Attribute	Specification
Brand	IFB
Model / Part Number	UF221RURSL370
Component Type	Front Load Door Rubber Gasket / Bellow Sleeve
Configuration	RC (Round Curve) Door with Drum Lamp Port
Appliance Capacity	6 kg Front Load Washers
Material	Heavy-Duty Molded EPDM Rubber
Color / Finish	Dark Grey / Black
Country of Origin	India
Package Contents	1x Door Rubber Bellow Sleeve