IFB Washing Machine Poly V Drive Belt 1214mm -6PJ

The IFB Washing Machine Poly-V Drum Drive Belt (Part Number: UF221RUBLT130 / Specification: 6PJ 1214 EL) is an authentic original equipment manufacturer (OEM) replacement drive belt designed for select IFB front load washing machines. Connecting the drive motor shaft pulley directly to the large drum pulley wheel, this elastic 6-rib multi-groove belt transfers rotational torque to tumble and spin the wash basket. Its specialized synthetic rubber composition and internal tensile cords provide the exact elasticity required for self-tensioning installations, dampening motor vibrations and preventing slippage during high-speed spin cycles.

Key Features

• 6-Rib Multi-Groove Profile (6PJ): Precision micro-v ribs seat securely into motor pulley grooves to maximize surface contact and prevent belt wander.

• Elastic Self-Tensioning Design (EL / EPJ): Engineered with high-strength elastic tensile cords that maintain consistent grip and tension without requiring a manual tensioner bracket.

• Heat & Friction Resistant Elastomer: High-grade synthetic rubber withstands continuous friction, motor heat, and heavy spin dynamics without cracking or glazing.

• Precision Factory Fit: Manufactured to exact IFB 1214 mm effective length tolerances for balanced rotation and reduced operational noise.

Benefits

• Solves symptoms where the motor runs but the drum does not rotate, sluggish drum tumbling, or belt squealing during spin cycles.

• Replaces snapped, stretched, shredded, cracked, or glazed drive belts.

• Direct OEM replacement ensures 100% pulley alignment and proper torque transfer.

Applications

Designed specifically for select IFB front load washing machine models requiring a 6PJ 1214 EL drive belt with part number UF221RUBLT130.

What's Included

• 1 x Genuine IFB Washing Machine Poly-V Drive Belt (6PJ 1214 EL - UF221RUBLT130)

Usage Instructions

1. Disconnect the washing machine from the mains electrical supply and turn off the water taps.

2. Unscrew and remove the rear access panel from the back of the washing machine.

3. Remove the worn, snapped, or stretched belt from the drum and motor pulleys.

4. Clean any accumulated belt dust or debris from the grooved motor pulley and large drum pulley.

5. Loop the new belt around the small grooved motor shaft pulley first, ensuring the 6 ribs sit centered in the grooves.

6. Position the belt partially over the edge of the large drum pulley.

7. Slowly rotate the large drum pulley by hand while guiding the belt onto the wheel until it snaps fully into place (stretch-to-fit method).

8. Rotate the drum pulley manually several turns in both directions to verify proper alignment and centering.

9. Reinstall the rear service panel and run a brief rinse/spin test cycle.

Safety Instructions

• Always disconnect power from the appliance before removing panels or handling drive components.

• Keep fingers clear of the pinch points between the belt and pulley wheel during installation.

Care Instructions

• Inspect annually for surface cracking, rib peeling, or excessive slack; avoid overloading the washer beyond rated drum capacity.

Technical Specifications

Attribute	Specification
Brand	IFB
Model / Part Number	UF221RUBLT130
Belt Specification	6PJ 1214 EL (Elastic / Multi-Ribbed)
Rib Count	6 Ribs (5 Grooves)
Belt Profile	PJ Section (Micro-V / Poly-V)
Effective Length	1214 mm (Elastic nominal length)
Material	Reinforced Synthetic Elastomer / Polyester Cords
Color / Finish	Black
Country of Origin	India
Package Contents	1x Poly-V Drive Belt