IFB Washing Machine POWER BOARD -DRYER(WASHER DRYER)

The IFB Washer Dryer Power Board / Dryer Control PCB (Part Number: UF221ECPCB410) is an authentic original equipment manufacturer (OEM) replacement printed circuit board designed specifically for IFB front load washer-dryer combo models. Acting as the core power distribution and control unit for the drying system, this board orchestrates power delivery to the drying heating element, condenser blower motor, exhaust/circulation fans, and temperature monitoring thermistors (NTCs). Built with heavy-duty solid-state relays, voltage regulators, and protective conformal coating, it ensures stable performance against voltage fluctuations and continuous thermal loading during extended drying cycles.

Key Features

• Dedicated Dryer Power Management: Controls high-current relays dedicated to the heating duct elements, blower motors, and safety thermostats.

• Factory Pre-Programmed Firmware: Pre-flashed with IFB factory parameters for plug-and-play communication with the front user interface display board.

• Thermal & Moisture Conformal Coating: Insulating resin layer shields electronic micro-components from internal cabinet humidity, steam condensation, and lint buildup.

• OEM Multi-Pin Wire Harness Headers: Keyed wire terminal connectors ensure error-free, foolproof reconnection to the machine harness.

• Integrated Over-Current & Surge Protection: Safeguards internal circuits and external actuators from voltage spikes and power anomalies.

Benefits

• Solves symptoms such as clothes remaining wet after a dry cycle, dryer not heating, blower motor failure, or drying cycle error codes (e.g., dE, tE, HE, drying timeout).

• Fixes completely dead dryer power modes caused by blown board traces, burned heater relays, or shorted power components.

• Direct OEM replacement ensures 100% electrical parameter match and communication timing with the front display panel.

Applications

Designed specifically for select IFB front load washer-dryer combo appliances requiring dryer power PCB part number UF221ECPCB410.

What's Included

• 1 x Genuine IFB Washer Dryer Power Board / Control PCB (UF221ECPCB410)

Usage Instructions

1. Disconnect the appliance completely from the mains electrical socket and turn off the water taps.

2. Remove the top lid and rear cabinet panels to access the internal electronic housing.

3. Locate the dryer power board enclosure and unclip the protective plastic cover.

4. Take clear reference photographs of all keyed wire harness connections and terminal routings.

5. Carefully unseat the wiring plugs and sensor connectors from the faulty PCB.

6. Release the PCB retaining plastic clips or mounting screws and lift the old board out.

7. Seat the new IFB UF221ECPCB410 power board securely into the housing slots until locked.

8. Reconnect all wire harness plugs firmly according to the reference photos, ensuring each connector clicks into its matching header.

9. Close and secure the PCB casing, reinstall the machine panels, restore power, and run a test wash and dry cycle to verify full operational control.

Safety Instructions

• Always isolate the washing machine completely from AC power before servicing or handling electronic boards.

• Use electrostatic discharge (ESD) precautions by touching a grounded metal frame before touching PCB components.

Care Instructions

• Keep the internal cabinet area clean and free from heavy lint accumulation or moisture leaks to protect circuit longevity.

Technical Specifications

Attribute	Specification
Brand	IFB
Model / Part Number	UF221ECPCB410
Component Type	Dryer Power Board / Electronic Control PCB
Appliance Type	Front Load Washer-Dryer Combo
Operating Voltage	220–240V AC, 50 Hz
Protection	Moisture/Thermal Conformal Coated
Country of Origin	India
Package Contents	1x Dryer Power Control Board