SPARES
IFB Washing Machine BOTTOM POWER BOARD NEO-2 7KG
HomeWashing MachineIFBIFB Washing Machine BOTTOM POWER BOARD NEO-2 7KG

IFB Washing Machine BOTTOM POWER BOARD NEO-2 7KG

Part No : UF221ECEPB420Origin : Genuine

Rs 6,466.00
(Incl. of all taxes)
In Stock

About this item

The IFB Washing Machine Bottom Power Board (Part Number: UF221ECEPB420 / Platform: NEO-2 7KG) is an authentic original equipment manufacturer (OEM) replacement main control PCB designed for select IFB 7 kg front load washing machines. Positioned in the lower base or rear electronic housing of the appliance, this module functions as the central power handling unit. It interprets cycle commands from the user interface display board, routing regulated AC power to high-load components including the drive motor, water inlet solenoids, door interlock switch, drain pump, and heating element. Built with heavy-duty solid-state relays, voltage rectifiers, and protective conformal coating, it ensures stable operation against power spikes, vibration, and internal cabinet moisture.

Key Features

  • NEO-2 7 kg Architecture Compatibility: Specifically engineered and pre-programmed for IFB front load washing machine platforms using the NEO-2 7 kg electronic control series.

  • Heavy-Duty High-Load Switching: Equipped with robust power relays and motor drive components capable of handling high starting currents and continuous heating loads.

  • Factory Pre-Programmed Firmware: Pre-flashed with IFB factory logic for immediate plug-and-play communication with the display interface.

  • Conformal Moisture & Dust Protection: Coated with a protective insulating layer that shields SMD electronics from cabinet condensation, humidity, and detergent vapor.

  • Keyed Wiring Harness Connectors: Standardized multi-pin terminal blocks ensure precise, error-free reconnection during service.

Benefits

  • Solves symptoms such as a completely dead washing machine (no power), motor not rotating, water heater failure, or communication error codes (e.g., E01, dE, HE, tE, F-codes).

  • Fixes blown circuit tracks, burned relay contacts, and power failures caused by household voltage surges or short circuits.

  • Direct OEM replacement guarantees 100% connector alignment, factory code execution, and physical mounting fit.

Applications

Designed specifically for select IFB 7 kg front load washing machine models (including Elena, Senator, Executive, and Neo-2 7 kg platform series) requiring bottom power board part number UF221ECEPB420.

What's Included

  • 1 x Genuine IFB Front Load Washing Machine Bottom Power Board (UF221ECEPB420)

Usage Instructions

  1. Disconnect the washing machine completely from the mains power socket and turn off the water supply taps.

  2. Remove the rear service panel or access the bottom electronic tray (depending on your specific IFB chassis layout).

  3. Unclip or open the protective plastic control box housing the bottom power board.

  4. Take clear reference photographs of all wiring harnesses, power leads, and sensor connectors.

  5. Carefully disconnect all terminal plugs and ground connections from the faulty PCB.

  6. Release the PCB locking clips or mounting screws and lift the board out of the housing tray.

  7. Snap or fasten the new IFB UF221ECEPB420 power board into the mounting enclosure.

  8. Reconnect all wire harnesses firmly according to your reference photos, ensuring each connector clicks into its corresponding header.

  9. Close the protective enclosure, reinstall cabinet panels, restore electrical power, and run a complete test wash cycle to verify proper operation.

Safety Instructions

  • Always isolate the machine completely from AC power before servicing or handling electronic boards.

  • Practice electrostatic discharge (ESD) safety by touching a grounded metal chassis before handling the bare circuit board.

Care Instructions

  • Keep the lower machine base dry and free of lint accumulation or moisture leaks to maximize PCB lifespan.

Technical Specifications

AttributeSpecification
BrandIFB
Model / Part NumberUF221ECEPB420
Component TypeBottom Main Power Board / Electronic Control PCB
Platform / SeriesNEO-2 7KG Series
Appliance Capacity7 kg Front Load Washers
Operating Voltage220–240V AC, 50 Hz
ProtectionConformal Coated (Moisture & Vibration Resistant)
Country of OriginIndia
Package Contents1x Bottom Power Board
Does this part fit your model?
Deliver to
Delivery
Within 5 Days
Return
No Return
Warranty
No Warranty

Compatibility

Confirm compatibility before adding to cart.

Model NumberSERENA GXN 7012
IFB
CategoryWashing Machine
TypeFront Load
Variant6.1 - 7 K.g
Model NumberELITE BXN 7012HK
IFB
CategoryWashing Machine
TypeTop Load
Variant6.1 - 7 K.g
Model NumberSERENA BXN 7012K
IFB
CategoryWashing Machine
TypeFront Load
Variant6.1 - 7 K.g
Model NumberSERENA SXN 7012
IFB
CategoryWashing Machine
TypeFront Load
Variant6.1 - 7 K.g
Model NumberSERENA MSN 7012K
IFB
CategoryWashing Machine
TypeFront Load
Variant6.1 - 7 K.g
Model NumberELITE MBN 7012HK
IFB
CategoryWashing Machine
TypeFront Load
Variant6.1 - 7 K.g
Model NumberSERENA MBN 7012
IFB
CategoryWashing Machine
TypeFront Load
Variant6.1 - 7 K.g
Model NumberSERENA MBN 7012K
IFB
CategoryWashing Machine
TypeFront Load
Variant6.1 - 7 K.g
This item does not have any reviews yet.
No questions yet. Be the first to ask!

We'd love to hear what you think!

Return & Exchange

From pick-up to refund, we make every return fast, fair, and friendly.

Fast Shipping

We ensure every order is packed securely and shipped quickly across India.

Support 24/7

Expert help, anytime you need it — chat, call, or email us for instant assistance.

1

Common washing machine Problems

  • Washing machine not draining
  • Drum not spinning
  • Water not filling
  • Washing machine motor not working
  • Machine vibrating excessively

Popular washing machine Spare Parts

  • Motor
  • Drain Pump
  • Drum Bearing
  • Door Seal
  • Pcb Board