IFB Washing Machine PUMP FILTER - HANYU (ULTRA)

The IFB Washing Machine Drain Pump Filter Plug (Part Number: UF211SIPFU010 / Type: Hanyu - Ultra) is an authentic original equipment manufacturer (OEM) replacement component designed for select IFB front load washing machines. Screwed directly into the lower front drain pump body, this debris trap collects foreign items—such as coins, pins, loose buttons, and heavy lint clumps—before they reach and jam the rotating pump impeller. Constructed with a heavy-duty polymer body, an ergonomic grip handle, and a high-density rubber sealing O-ring, it provides a reliable, pressure-tight seal that prevents leaks during wash and spin cycles.

Key Features

• Hanyu Pump Housing Compatibility: Precision-threaded profile engineered to mate smoothly with factory Hanyu drain pump filter chambers.

• Integrated Debris Basket / Coin Trap: Perforated cylindrical catch basin captures small foreign objects and fabric fibers while allowing unobstructed water evacuation.

• Heavy-Duty Watertight O-Ring Seal: Features a pre-installed synthetic rubber sealing ring that stops water weeping and leaks from the front service flap.

• Ergonomic Twist-Lock Handle: Robust textured wing grip allows easy hand tightening and tool-free removal during routine filter maintenance.

Benefits

• Solves symptoms such as draining failure, drain error codes (e.g., E02 / OE / dO), pump jamming, and humming noises from trapped foreign objects.

• Eliminates front service panel water leaks caused by cracked filter threads, stripped grips, or degraded rubber seals.

• Direct OEM replacement ensures 100% thread pitch match and leak-free seating without leaking or cross-threading.

Applications

Designed specifically for IFB front load washing machine models (including Ultra, Elena, Senator, Executive, and Diva series) equipped with Hanyu pump assemblies requiring drain filter part number UF211SIPFU010.

What's Included

• 1 x Genuine IFB Front Load Washing Machine Drain Pump Filter Plug with Sealing O-Ring (UF211SIPFU010)

Usage Instructions

1. Unplug the washing machine from the mains electrical socket and prepare a shallow tray and towel to catch residual water.

2. Open the small lower access door on the bottom front panel of the washing machine.

3. If equipped with an emergency drain hose, pull it out, remove the cap, and drain standing water into the tray first.

4. Turn the existing filter handle counter-clockwise by hand until it unscrews completely, then pull it out.

5. Clear any debris, coins, or lint from the internal pump chamber and check that the impeller spins freely.

6. Inspect the sealing area and screw the new IFB UF211SIPFU010 filter into the housing clockwise until it seats firmly and snugly against the rim.

7. Close the front service flap and run a short rinse/spin cycle to verify a watertight seal.

Safety Instructions

• Allow wash water to cool before removing the pump filter if a hot wash cycle was recently run.

• Always isolate electrical power before reaching fingers near the internal pump impeller area.

Care Instructions

• Clean out the coin trap filter once every 4–6 weeks to prevent lint buildup, poor drainage performance, and foul odors.

Technical Specifications

Attribute	Specification
Brand	IFB
Model / Part Number	UF211SIPFU010
Component Type	Drain Pump Debris Filter / Coin Trap Plug
Pump Compatibility	Hanyu Drain Pump Assembly (Ultra Series)
Appliance Type	Front Load Washing Machines
Material	High-Grade Molded Polymer & Synthetic Rubber O-Ring
Color / Finish	Black / Dark Grey
Country of Origin	India
Package Contents	1x Drain Pump Filter Plug