IFB Washing Machine DOUBLE SOLENOID VALVE (ULTRA)

The IFB Washing Machine Double Solenoid Water Inlet Valve (Part Number: UF211ELDSV010 / Ultra Series) is an authentic original equipment manufacturer (OEM) replacement component designed for select IFB front load washing machines. Electronically actuated by the main PCB controller, this 2-way dual-coil valve manages independent water routing into the main wash and pre-wash/fabric softener detergent dispenser compartments. Built with a reinforced thermoplastic body, high-grade internal diaphragms, and dual electromagnetic coils, it ensures precise water metering and dependable, non-drip sealing across varying household water pressure levels.

Key Features

• Dual Solenoid 2-Way Flow Control: Twin 220–240V AC electromagnetic coils independently direct water to separate detergent and conditioner dispenser chambers.

• Integrated Fine Mesh Sediment Filter: Built-in removable inlet screen stops silt, sand, and pipe rust particles from entering internal valve seats and the wash drum.

• Reinforced Pressure-Resistant Housing: Molded from durable industrial polymers engineered to withstand continuous municipal/pump water pressure and thermal variations.

• Standard Threaded Inlet Port: Universal 3/4" BSP male threaded connection attaches securely to standard washing machine inlet hoses.

Benefits

• Solves symptoms such as slow filling, no water entering the drum, wash fill error codes (e.g., E01 / IE / dO), or water continuously trickling into the tub when the machine is turned off.

• Fixes failure to flush detergent or fabric softener out of the dispenser drawer due to a burned-out secondary solenoid coil.

• Direct OEM replacement ensures 100% electrical terminal match, bracket alignment, and hydraulic flow compatibility without modifications.

Applications

Designed specifically for select IFB front load washing machine models (including Ultra, Elena, Senator, Executive, and Diva series) requiring a 2-way double solenoid valve with part number UF211ELDSV010.

What's Included

• 1 x Genuine IFB Front Load Washing Machine Double Solenoid Water Inlet Valve (UF211ELDSV010)

Usage Instructions

1. Unplug the washing machine from the mains electrical outlet and turn off the water supply tap.

2. Unscrew the cold water supply hose from the rear threaded connection of the valve.

3. Remove the top lid of the washing machine by unscrewing the rear retaining screws and sliding the panel back.

4. Label and disconnect the electrical wire spade connectors from both solenoid coils.

5. Loosen the spring hose clamps and disconnect the two rubber dispenser hoses from the valve barbs.

6. Unscrew the mounting screw(s) securing the valve bracket to the rear cabinet and remove the faulty unit.

7. Install the new IFB UF211ELDSV010 double valve, secure the mounting bracket, reattach the two dispenser hoses with clamps, and reconnect the wire terminals to the correct coils.

8. Reinstall the top cover, reconnect the external water supply hose, turn on the tap to check for leaks, and run a test cycle.

Safety Instructions

• Always isolate electrical power and shut off water supply lines before disassembling appliance covers or handling internal wiring.

• Ensure spade terminals are seated firmly and fully insulated against moisture contact.

Care Instructions

• Periodically unscrew the inlet hose and clean the internal plastic mesh filter with a soft brush to remove trapped sediment and maintain strong water pressure.

Technical Specifications

Attribute	Specification
Brand	IFB
Model / Part Number	UF211ELDSV010 (33490283 / 33490506)
Component Type	Double Solenoid Water Inlet Valve (2-Way / Dual Coil)
Series / Variant	Ultra Series
Operating Voltage	220–240V AC, 50/60 Hz
Inlet Port	3/4" BSP Male Thread
Outlet Configuration	Dual Hose Barbs (2-Way Output)
Body Material	Engineered Thermoplastic & Copper Coils
Country of Origin	India / Italy (OEM Sourced)
Package Contents	1x Double Solenoid Water Inlet Valve