IFB Washing Machine Non-Pump Drain Hose

The IFB Washing Machine Non-Pump Drain Hose (Part Number: TL221MNNDH010) is an authentic original equipment manufacturer (OEM) replacement discharge line designed specifically for IFB 6.5 kg top load washing machines. Engineered for non-pump (gravity-fed) drainage configurations, this flexible corrugated hose connects directly to the internal bottom drain valve housing, directing wastewater safely from the tub into your household floor drain or drain outlet. Its durable thermoplastic construction resists kinking, abrasion, and hot soapy water degradation to deliver long-lasting, leak-free operation.

Key Features

• Corrugated Flexible Design: Ribbed profile allows tight bends and routing without pinching or kinking, ensuring unrestricted gravity water discharge.

• Non-Pump / Gravity Drain Optimization: Engineered with an optimal internal bore to facilitate rapid, unrestricted gravity-assisted drainage during drain cycles.

• Heavy-Duty Chemical-Resistant Polymer: Molded from premium EVA/polyethylene compound that withstands laundry detergents, bleaches, hot drain water, and friction against floors.

• Reinforced Connection Cuff: Features a durable, flexible rubberized collar designed for a tight, clamp-secured fit over the internal machine drain valve outlet.

Benefits

• Solves common drainage issues including water leaking beneath or behind the machine, cracked/split drain pipes, or slow drainage caused by crimped hoses.

• Replaces brittle, chewed (rodent-damaged), clogged, or leaking factory discharge hoses.

• Direct OEM replacement ensures an exact fit on 6.5 kg IFB top loaders without requiring pipe adapters or extensions.

Applications

Designed specifically for IFB 6.5 kg top load washing machine models (including TL-SDW, TL-RDW, Aqua, and HydroWash series) configured with non-pump gravity drain systems requiring part number TL221MNNDH010.

What's Included

• 1 x Genuine IFB Top Load Washing Machine Non-Pump Drain Hose (TL221MNNDH010)

Usage Instructions

1. Unplug the washing machine from the power supply and shut off the water intake taps.

2. Tilt the machine gently to access the lower rear/bottom drain outlet (ensure a towel is placed underneath to catch residual water).

3. Loosen the spring clamp or screw clamp securing the old drain hose to the internal drain valve elbow and pull off the damaged hose.

4. Clean away any lint, thread buildup, or limescale from the drain connection spout.

5. Slide the retaining clamp over the new IFB TL221MNNDH010 drain hose cuff.

6. Push the hose cuff firmly onto the drain outlet barb until fully seated and tighten the clamp securely.

7. Route the hose through the rear cabinet grommet/clip and lay it flat toward the floor drain (ensuring no upward loops that impede gravity flow).

8. Run a rinse and drain cycle to inspect the connection for watertight performance.

Safety Instructions

• Ensure electrical power is fully disconnected before tilting or working underneath the appliance.

• Ensure the drain hose is positioned flat along the floor without high bends, as non-pump gravity systems require a downward slope to evacuate water completely.

Care Instructions

• Inspect periodically for lint accumulation inside the hose or bends that might restrict flow.

• Keep the area around the drain pipe clean and clear of sharp objects or heavy items resting on the hose.

Technical Specifications

Attribute	Specification
Brand	IFB
Model / Part Number	TL221MNNDH010
Component Type	Washing Machine Gravity Drain Hose / Discharge Pipe
Drainage System Type	Non-Pump (Gravity Drain System)
Appliance Capacity	6.5 kg Top Load Washers
Material	Heavy-Duty Flexible Corrugated Polyethylene / EVA
Color / Finish	Grey / Dark Grey
Country of Origin	India
Package Contents	1x Non-Pump Drain Hose