IFB Washing Machine DISPLAY BOARD TL REW- REG 6.5KG

The IFB Washing Machine User Interface Display Board (Part Number: TL221ECPCB130 / Model Variant: TL REW-REG 6.5KG) is an authentic original equipment manufacturer (OEM) replacement printed circuit board designed for select IFB fully automatic top load washing machines. Mounted directly beneath the top fascia console, this module serves as the primary user control interface. It captures program selections, water level adjustments, and start/pause commands via tactile micro-switches while powering the LED/digital cycle status indicators. Engineered with durable surface-mount electronics and a protective moisture-resistant coating, it ensures reliable touch feedback and stable communication with the main power board.

Key Features

• TL REW-REG 6.5 kg Specific Architecture: Engineered and programmed specifically for IFB 6.5 kg REW-REG top load washing machine control panels.

• Integrated Tactile Push-Buttons & Indicators: Features factory-mounted micro-switches and bright LED status indicators for clear cycle monitoring and smooth program selection.

• Moisture-Resistant Conformal Coating: Insulating protective film shields sensitive microcontroller traces from steam, high humidity, water splash, and detergent vapor.

• OEM Multi-Pin Communication Header: Keyed ribbon/wire harness connector ensures foolproof, plug-and-play linkage to the main controller.

• Factory Pre-Programmed Firmware: Ready for instant installation with no manual software programming or parameter setup required.

Benefits

• Solves symptoms such as unresponsive control buttons, erratic program selection, blank/flickering LED displays, or cycle start failures.

• Eliminates control board failures caused by accidental water ingress, humidity corrosion, or cracked micro-switches.

• Direct OEM replacement ensures 100% button alignment with top console buttons and exact communication protocol matching.

Applications

Designed specifically for IFB 6.5 kg top load washing machine models (including TL-REW, TL-REG, Aqua, and HydroWash series) requiring user interface display PCB part number TL221ECPCB130.

What's Included

• 1 x Genuine IFB Top Load Washing Machine User Interface Display Board (TL221ECPCB130)

Usage Instructions

1. Disconnect the washing machine completely from the mains power socket and turn off the water taps.

2. Remove the retaining screws securing the top control console fascia to the machine body.

3. Carefully lift the control console and unclip the protective plastic casing surrounding the display PCB.

4. Take clear reference photos of the wire harness orientation and connector latch.

5. Carefully unseat the multi-pin ribbon/wire connector from the faulty display board.

6. Release the plastic retaining clips securing the PCB to the front fascia and remove the board.

7. Align the push-buttons and LED indicators of the new IFB TL221ECPCB130 display board with the fascia panel guides and press gently until locked.

8. Reconnect the communication wire harness firmly until the connector tab clicks into place.

9. Fasten the protective rear cover, reassemble the console panel onto the machine, restore power, and test all buttons and cycle displays.

Safety Instructions

• Always isolate the machine completely from AC electrical power before removing the console or handling electronic components.

• Practice electrostatic discharge (ESD) precautions by touching a grounded metal frame before touching the circuit board.

Care Instructions

• Avoid spraying water directly onto the top control console and wipe down the panel with a dry microfiber cloth.

Technical Specifications

Attribute	Specification
Brand	IFB
Model / Part Number	TL221ECPCB130
Component Type	User Interface Display Board / Control Console PCB
Series / Variant	TL REW-REG Series
Appliance Capacity	6.5 kg Top Load Washers
Operating Voltage	Low-Voltage DC (Supplied via Main Board)
Protection	Conformal Coated (Moisture & Splash Resistant)
Country of Origin	India
Package Contents	1x User Interface Display Board