IFB Washing Machine INLET VALVE (1W HB C) H

The IFB Washing Machine 1-Way Water Inlet Solenoid Valve (Part Number: TL211ELINV110 / Type: 1W HB C - H) is an authentic original equipment manufacturer (OEM) replacement component designed for select IFB top load washing machines. Controlled electronically by the main PCB control board, this single-outlet solenoid valve opens and closes dynamically to regulate water intake during fill and rinse cycles. Constructed with a high-grade molded plastic housing, an internal rubber diaphragm, and a fine mesh debris filter, it provides dependable, non-drip sealing and consistent flow rates across various household water pressure levels.

Key Features

• 1-Way Single Solenoid Actuator: Precision 220–240V AC coil actuator provides swift on/off flow management during fill and rinse stages.

• Integrated Fine Mesh Sediment Filter: Built-in removable inlet screen stops rust, sand, and pipe sediment from entering internal valve diaphragms and the wash tub.

• Heavy-Duty Reinforced Polymer Body: Engineered to withstand continuous domestic water pressure, water hammer shocks, and hot/cold thermal shifts.

• Standard Threaded Inlet Connection: Universal 3/4" BSP threaded inlet port connects easily to standard washing machine water supply hoses.

Benefits

• Solves symptoms such as washing machine not filling with water, slow filling / fill error codes (e.g., E1/IE), or water continuously trickling into the tub when powered off.

• Eliminates internal valve weeping and pressure-induced leaks inside the rear cabinet.

• Direct OEM replacement ensures 100% factory terminal connection, mounting bracket alignment, and hydraulic compatibility.

Applications

Designed specifically for select IFB top load washing machine models requiring a single-way (1-Way) water inlet valve with part number TL211ELINV110.

What's Included

• 1 x Genuine IFB Top Load Washing Machine 1-Way Water Inlet Valve (TL211ELINV110)

Usage Instructions

1. Unplug the washing machine from the electrical mains socket and turn off the water supply tap.

2. Unscrew the external water inlet hose from the rear threaded connection of the valve.

3. Remove the top rear access panel or top cover screws to expose the internal valve assembly.

4. Note the wire terminal locations, then disconnect the electrical wire spade connectors from the solenoid coil.

5. Loosen the hose clamp and slide the internal water outlet tube off the valve hose barb.

6. Unscrew the retaining screws securing the valve bracket to the rear frame, and remove the faulty valve.

7. Mount the new IFB TL211ELINV110 valve, reconnect the internal dispenser hose, secure the hose clamp, and attach the electrical terminals.

8. Reassemble the rear panel, reattach the external water supply hose, open the tap to inspect for leaks, and run a test fill cycle.

Safety Instructions

• Always isolate electrical power and shut off water supply lines before disassembling appliance covers or handling wiring.

• Ensure spade terminals are seated firmly and fully insulated against moisture contact.

Care Instructions

• Periodically unscrew the inlet hose and clean the internal plastic mesh filter with a soft brush to remove trapped silt and maintain strong water flow.

Technical Specifications

Attribute	Specification
Brand	IFB
Model / Part Number	TL211ELINV110
Component Type	1-Way Water Inlet Solenoid Valve (1W HB C - H)
Actuator / Coil Voltage	220–240V AC, 50/60 Hz
Inlet Port	3/4" BSP Male Thread
Outlet Port	Single Hose Barb (HB)
Body Material	Engineered High-Grade Thermoplastic
Color / Finish	White / Blue (Standard OEM Finish)
Country of Origin	India
Package Contents	1x 1-Way Water Inlet Valve