IFB Washing Machine DRAIN MOTOR 10KGF 44.5MM

The IFB Washing Machine Drain Retractor Motor (Part Number: TL211ELDRM020) is an authentic original equipment manufacturer (OEM) replacement electro-mechanical actuator designed for select IFB fully automatic top load washing machines. Powered by a high-torque 220–240V AC motor mechanism, this component pulls the drain valve assembly open while disengaging the gear case brake mechanism during rinse and spin cycles. Featuring a robust 10 kgf pulling capacity and a precise 44.5 mm retraction stroke, it ensures swift water evacuation and smooth transition from agitate to high-speed spin modes.

Key Features

• High Pulling Force (10 kgf): Delivers powerful retraction force to overcome stiff drain valve springs and clutch brake tension reliably.

• Precision 44.5 mm Stroke Length: Engineered to provide the exact travel required to open the drain flapper fully and release the tub brake.

• Heavy-Duty Geared Retractor Mechanism: Encased in a moisture-resistant polymer housing with durable internal reduction gearing for long service life.

• Pre-Fitted Retraction Cable & Clip: Includes high-tensile steel wire pull cord with standard hook fitting for quick linkage attachment.

• Factory Standard Electrical Terminals: Standard spade connector block ensures safe, plug-and-play wiring to the washing machine harness.

Benefits

• Solves common issues such as washing machine not draining water, drain error codes (e.g., E02 / E2 / OE), or failure to spin due to an unreleased brake.

• Prevents motor burnout and buzzing caused by jammed internal gears or weakened retractor springs.

• Direct OEM replacement ensures 100% mechanical stroke match and electrical compatibility without modifications.

Applications

Designed specifically for select IFB fully automatic top load washing machine models requiring a 10kgf / 44.5mm stroke drain retractor motor with part number TL211ELDRM020.

What's Included

• 1 x Genuine IFB Top Load Washing Machine Drain Retractor Motor (TL211ELDRM020)

Usage Instructions

1. Disconnect the washing machine from the mains electrical socket and turn off the water supply before starting the repair.

2. Carefully tilt or lay the washing machine on its side on a protective mat to access the base assembly.

3. Locate the drain retractor motor mounted near the drain valve and gear case base.

4. Unplug the electrical wiring harness connector from the drain motor terminals.

5. Unhook the wire retractor cable/clip from the drain valve lever and brake arm.

6. Unscrew the mounting bolts/screws securing the drain motor bracket to the washer base frame and remove the faulty unit.

7. Mount the new IFB TL211ELDRM020 drain motor, attach the retractor wire hook to the drain valve assembly, and tighten the mounting screws.

8. Reconnect the electrical terminal block securely.

9. Stand the machine upright, reconnect power and water, and run a spin/drain test cycle to ensure smooth cable retraction and water discharge.

Safety Instructions

• Always isolate electrical power completely before accessing the underside of the washing machine.

• Ensure electrical connectors are securely seated and free from moisture or water residue before testing.

Care Instructions

• Keep the underside base area free from lint accumulation, moisture leaks, and rodent infestation to extend motor life.

Technical Specifications

Attribute	Specification
Brand	IFB
Model / Part Number	TL211ELDRM020
Component Type	Washing Machine Drain Retractor Motor / Actuator
Pulling Force	10 kgf (Kilogram-force)
Stroke Length	44.5 mm
Operating Voltage	220–240V AC, 50 Hz
Housing Material	High-Grade Impact-Resistant Polymer
Color / Finish	Black / Grey (OEM Specification)
Country of Origin	India
Package Contents	1x Drain Retractor Motor