LG Washing Machine Cabinet Base Assembly with Heat Pump (24 inch WashTower Dryer)

The LG cabinet base assembly AAN73349767 is a genuine OEM base unit for the heat pump dryer section of LG 24 inch WashTower (24WT) units. Built on a brown PP (MT42) base with a pump back, it carries the heat pump system: twin compressor with inverter motor, 11 FPI condenser, BLDC pump, Nidec motor and the improved lint path. Replace a faulty or damaged dryer base system with this genuine LG part.

Key Features

• Genuine LG Part: OEM cabinet base assembly AAN73349767
• Base: PP (MT42), brown, pump back
• Heat Pump: Twin compressor with inverter motor, 11 FPI condenser
• Includes: BLDC pump, Nidec motor, improved lint path
• Model: 24 inch WashTower dryer (24WT)

Benefits

• Replaces the complete heat pump base in one part
• Restores efficient, low-temperature heat pump drying
• Exact OEM fit with the dryer cabinet
• Genuine LG quality

Compatibility

LG 24 inch WashTower units that use cabinet base assembly AAN73349767. Please match the part number with your old part or check your model before ordering.

What's Included

1 x LG Cabinet Base Assembly AAN73349767

Usage Instructions

1. Unplug the appliance, turn off the water supply and disconnect the hoses.
2. Remove the panels around the part as per the service manual.
3. Unscrew and take out the old part, moving any attached parts across.
4. Fit the new part using the original mounting points.
5. Refit all panels, level the appliance and run a test cycle.

Safety Instructions

Always unplug the appliance before service. This assembly contains a sealed refrigerant system, is heavy and must be handled upright. Installation must be done by a trained technician only. Check the part number and model before ordering.

Care Instructions

• Keep the appliance on a dry, level floor.
• Do not overload the appliance.
• Wipe the outer surfaces with a soft, damp cloth.

Technical Specifications