LG Microwave Oven Power Cord Assembly

The LG Microwave Power Cord Cable Assembly (Part Number: 6411W1A004Z) is an authentic original equipment manufacturer (OEM) replacement power supply lead designed for LG microwave ovens. Connected at the rear chassis input, this high-durability, flame-retardant power cord safely routes AC line power to the main fuse board, high-voltage transformer, and internal control assemblies.

Key Features

• OEM Precision Safety: Built to exact factory specifications using heavy-duty H05VV-F 3x1.5mm² copper conductors rated for up to 250V and 10A/16A loads.

• AMP Connector Terminals: Features pre-crimped, high-conductivity AMP terminals (170140-2, 170111-4) for a secure, low-resistance connection to internal terminal blocks.

• Heavy-Duty Cable Shielding: Encased in a durable, heat-resistant PVC jacket designed to withstand mechanical pulling, flexing, and high operational temperatures near appliance housings.

Benefits

• Replaces frayed, melted, cut, or damaged power cords that present severe electrical short or fire hazards.

• Solves completely dead microwave issues caused by broken copper conductors inside the power cable.

• Direct replacement ensures factory-certified electrical grounding and voltage safety compliance.

Applications

Designed specifically for select LG microwave oven models requiring part number 6411W1A004Z.

What's Included

• 1 x Genuine LG Microwave Power Cord Cable Assembly (6411W1A004Z)

Usage Instructions

1. DANGER: Unplug the appliance from the electrical wall outlet and turn off power at the main breaker panel before starting work. High-voltage capacitors inside microwaves retain dangerous electrical charges even when unplugged.

2. Remove the screws securing the outer cabinet casing and carefully lift off the metal cover.

3. Discharge the high-voltage capacitor using an insulated screwdriver across terminal posts to the metal chassis.

4. Locate the strain relief bushing and internal terminal connections where the power cord enters the rear cabinet frame.

5. Disconnect the ground screw and AMP terminal wire leads from the internal terminal block or noise filter board.

6. Squeeze and release the strain relief bushing, remove the damaged cord, thread the new LG 6411W1A004Z cable into place, secure the green/yellow ground wire, attach AMP terminals securely to the terminal block, reassemble the cabinet shell, and test power.

Safety Instructions

• Disconnect all electrical power prior to opening the microwave outer cabinet.

• Ensure the earth ground wire is screwed tightly against the metal frame to prevent electrical shock hazards.

Care Instructions

• Keep the external power cord clear of hot stovetop burners, sharp cabinet edges, and standing water. No ongoing maintenance required once installed.

 Technical Specifications