LG Washing Machine Bracket,Hinge

The LG Dryer Door Hinge Bracket (Part Number: 4810EL3006B) is an authentic original equipment manufacturer (OEM) replacement structural support plate designed for LG clothes dryers, condensing tumble dryers, and washer-dryer combination units. Mounted inside the front cabinet panel assembly, this rigid stamped metal plate serves as the structural backing base for the door hinge pivot mechanism. It reinforces the cabinet wall against the cantilever weight of the door assembly, preventing sheet metal fatigue, door drop, and latch misalignment over repeated opening and closing cycles.

Key Features

• Heavy-Gauge Stamped Steel Construction: Formed from high-tensile, corrosion-resistant galvanized metal designed to withstand heavy door loads without bending, warping, or stripping fastener threads.

• Curved Frame Profile & Factory Thread Extrusions: Features pre-formed contouring and stamped mounting pilot holes for flush alignment with factory hinge screws and chassis panels.

• Corrosion-Resistant Zinc Plating: Coated with a protective anti-rust finish designed to endure operating heat, humidity, and moisture over long-term use.

Benefits

• Solves sagging dryer doors, doors dragging against the bottom frame, failure to trigger the door safety switch, loose hinges, or stripped chassis fastener holes.

• Ensures tight perimeter seal compression to prevent warm exhaust air, lint, and moisture leaks around the door gasket.

• Direct OEM replacement guarantees factory-matched screw spacing and contour alignment without drilling or chassis modifications.

Applications

Designed specifically for select LG and Kenmore/LG clothes dryers, gas/electric dryers, and washer-dryer combination models requiring part number 4810EL3006B.

What's Included

• 1 x Genuine LG Dryer Door Hinge Support Bracket Plate (4810EL3006B)

Usage Instructions

1. Unplug the dryer/washer-dryer from the main AC electrical outlet and shut off gas or water lines before servicing.

2. Open the dryer door and support it from underneath to relieve weight from the hinge assembly.

3. Unscrew the hinge mounting screws securing the door to the front panel and set the door aside on a soft surface.

4. Access the internal cavity behind the front panel to remove the worn, bent, or stripped hinge bracket.

5. Align the new LG 4810EL3006B bracket plate behind the cabinet panel mounting holes.

6. Re-hang the door hinge, thread the mounting screws through the hinge and panel directly into the bracket plate, tighten securely, and verify smooth door operation and solid latch closure.

Safety Instructions

• Disconnect main AC electrical power and wear protective work gloves to guard against sharp sheet metal edges inside appliance frames.

Care Instructions

• Ensure all hinge mounting screws are tightened squarely and securely to avoid localized stress on the bracket threads.

Technical Specifications

Attribute	Specification
Brand	LG
Model / Part Number	4810EL3006B
Component Type	Tumble Dryer / Washer-Dryer Door Hinge Mounting Bracket Base
Material	Heavy-Gauge Galvanized Stamped Steel
Color / Finish	Silver / Metallic
Package Contents	1x Door Hinge Bracket